Contact : Mr. Phanthep Larppipitmongkhon +661-6162600 email: sales@royalintertrade.com, salesroyal@gmail.com

TH / EN

PRODUCT...Toolings and accessory


Engraving Bits - Plastics - Woods - Metals
Rotary engraving is the term used to describe engraving done with a rotating cutting tool in a motorized spindle. The tool, or cutter, cuts into the surface of the material to a predetermined depth and produces a groove of the same shape and dimension of the cutter. Rotary engraving can be performed on a wide variety of materials with plastic, brass and aluminum being the most common In addition to routing bits, we also offer a number of engraving bits. These bits come in a variety of tip widths and are available for either Flexible Engraving Stock (FLX) or Steel, Stainless Steel and Hard Metals (SSS). When selecting engraving bits for single stroke fonts, it is recommended that the width of the cut be approximately 12% of letter height. Example - 1/4 ? letter = .250 x .12 = .030 Bottom loading cutters can be used in routing spindles and the nose-riding engraver. Top-loading cutters are for the nose-riding engraver only.


  Description

ZZM-10A

             Wheel diameter

100 mm. / 4"

             Depth

50 mm. / 2"

             Hole size

20 mm / 3/4 "

             Spindle Speed

520 rpm

             Collet clamping diameter range

3 ~ 16 mm / 1/8 ~ 5/8"

             Tool post longitudinal travel

140 mm. / 5(1/2)"

             Tool post longitudinal micro adjustment stroke

18 mm. / 3/4 "

             Spindle longitudinal micro adjustment stroke

8 mm. / 1/3 "

             Grinding taper range

0 ~ 180 Degree

             Grinding negative angle range

0 ~ 52 Degree

             Grinding relief range

0 ~ 44 Degree

             Motor power

0.25 KW. / 1/3 HP.

             Speed (50HZ)

2810 rpm.

             Speed (60HZ)

3600 rpm

             Voltage

220 V.

             Net weight

50 Kg.

             Dimension size (L x W x H)

450 x 350 x 340 mm.

             Package size (L x W x H)

500 x 400 x 400 mm.